General Practice
Repair, test, adjust, or install electronic equipment, such as industrial controls, transmitters, and antennas.
Repair, test, adjust, or install electronic equipment, such as industrial controls, transmitters, and antennas.
Install, program, test, and repair electronic access control systems and door hardware, including readers, controllers, electric locks, and power/network components, for commercial and industrial sites.
Install, configure, calibrate, test, troubleshoot, and repair industrial control systems and instrumentation, including PLCs, HMIs, drives, sensors, and networks, to ensure safe, reliable automation performance.
Install, maintain, troubleshoot, and repair electrical and electronic systems in commercial and industrial facilities, including power distribution, motors, VFD/PLC controls, control panels, and instrumentation.
Install, test, troubleshoot, calibrate, and repair electronic systems and devices—including control, instrumentation, and communications equipment—using schematics, test instruments, and software tools in shop and field settings.
Install, troubleshoot, repair, and maintain industrial production equipment and facility systems—electrical, mechanical, pneumatic, and hydraulic—perform preventive maintenance, calibrate instrumentation, and support upgrades to ensure safe, reliable, and efficient operations.
Calibrate, test, adjust, and maintain measurement and test equipment, gages, and reference standards used in production and labs; troubleshoot measurement issues, perform minor repairs, and document traceable results to meet quality and regulatory requirements.
Install, align, test, troubleshoot, and repair microwave radio systems, including antennas, waveguides, RF amplifiers, and related control/network equipment for commercial and industrial sites.
Install, maintain, and repair electrical wiring, equipment, and fixtures. Ensure that work is in accordance with relevant codes. May install or service street lights, intercom systems, or electrical control systems.
Install, maintain, and repair electrical control systems and automation equipment. Build and wire control panels; terminate and test PLC I/O, VFDs, sensors, and safety circuits. Read and interpret schematics and ensure compliance with codes and machine safety standards while commissioning, calibrating, and troubleshooting to keep operations reliable.
Install, maintain, and repair electrical wiring, equipment, and fixtures in residential, commercial, and industrial settings. Ensure all work complies with the National Electrical Code and local regulations. May install or service street lighting, intercoms, generators, or electrical control systems.
Install, maintain, and repair industrial electrical power and control systems in plants and manufacturing facilities. Ensure work complies with NEC, NFPA 70E, and site safety standards. May install or service motors, VFDs, PLCs, and switchgear to support production.
Install, maintain, and repair overhead and underground electric transmission and distribution lines and related equipment. Ensure work complies with NESC, OSHA, and utility standards. May install or service transformers, switches, street lighting, and service drops.
Install, terminate, test, and service low-voltage cabling and systems including structured cabling, fiber, CCTV, access control, fire alarm, intercom, and AV, ensuring compliance with NEC, NFPA, and TIA standards.
Maintain, troubleshoot, and repair facility and industrial electrical systems, equipment, and controls to maximize uptime. Perform preventive and corrective maintenance, minor installations and upgrades, and ensure work complies with codes, safety standards, and site procedures.
Install, maintain, and repair electrical wiring, power distribution, and control systems aboard ships and in shipyards. Ensure all work complies with marine electrical codes and classification society standards. May install or service generators, switchboards, propulsion and auxiliary motors, navigation lighting, battery banks, alarms, and shore power.
Fabricate, install, and service neon and cold-cathode lighting and sign systems. Bend and process glass tubes, wire high-voltage transformers and GTO cable, mount and weatherproof sign components, and troubleshoot performance issues. Ensure compliance with NEC Article 600 and safety regulations, including proper handling of glass, gases, and mercury.
Install, maintain, and repair solar photovoltaic (PV) electrical systems, including modules, inverters, energy storage, and balance-of-system components. Ensure work complies with NEC, utility, and local codes; perform commissioning, troubleshooting, and safe interconnections to building services.
Install, cable, and maintain stage and event lighting and power systems for theaters, concerts, and live productions. Hang, circuit, focus, and troubleshoot fixtures, dimmers, distro, and control networks in compliance with codes and show safety. Support rehearsals and performances and may service followspots, practicals, effects, and temporary power for AV or scenery.
Assemble or modify electromechanical equipment or devices, such as servomechanisms, gyros, dynamometers, magnetic drums, tape drives, brakes, control linkage, actuators, and appliances.
Assemble and modify household and commercial appliances—such as refrigerators, washers, dryers, ovens, and dishwashers—by fitting mechanical, electrical, and plumbing components, following blueprints and work orders, and performing functional testing and quality checks.
Assemble and modify mechanical or electromechanical products and subassemblies, following blueprints, work instructions, and quality standards, using hand/power tools and test equipment.
Assemble or modify precision electromechanical devices at the bench, using microscopes, tweezers, and torque tools to meet tight tolerances for components such as miniature actuators, sensors, and control linkages.
Assemble, wire, and modify electrical equipment and subassemblies, including control panels, wiring harnesses, junction boxes, motor controls, and power distribution units, per blueprints and wiring diagrams.
Assemble, modify, and test electromechanical equipment and devices—such as servomechanisms, gyros, dynamometers, magnetic drums, tape drives, brakes, control linkages, and actuators—per blueprints, specifications, and quality standards.
Assemble, modify, and test electronic products and subassemblies, such as printed circuit boards, cable harnesses, control modules, and sensors, using soldering, wiring, and ESD-safe practices to meet engineering specifications and quality standards.
Assemble, install, repair, or maintain electric or hydraulic freight or passenger elevators, escalators, or dumbwaiters.
Install, service, and maintain residential accessibility lifts—home elevators, stairlifts, and platform lifts—ensuring safe, code‑compliant, and reliable operation for private residences.
Assemble and install electric or hydraulic passenger and freight elevators, aligning, wiring, adjusting, and commissioning systems to meet specifications, safety standards, and building codes.
Install, inspect, service, and repair electric and hydraulic passenger and freight elevators to ensure safe, code-compliant operation; may also work on escalators and dumbwaiters.
Install, troubleshoot, repair, and maintain electric escalators and moving walkways, ensuring safe, reliable operation and compliance with codes and manufacturer specifications.
Conduct energy audits of buildings, building systems, or process systems. May also conduct investment grade audits of buildings or systems.
Provide consulting to improve whole-building performance through audits, modeling, and optimization of envelopes, MEP systems, and controls. Deliver investment-grade analyses, actionable plans, and implementation support to enhance efficiency, comfort, indoor air quality, and decarbonization outcomes.
Conduct ASHRAE Level I-III and investment-grade energy audits of commercial buildings and campuses. Evaluate building envelopes and systems, analyze utility and BAS data, develop and prioritize energy conservation measures, and support implementation, commissioning, and measurement and verification to deliver cost savings and performance improvements.
Analyze energy consumption, cost, and performance data for buildings, systems, or portfolios to identify efficiency, cost-saving, and decarbonization opportunities. Develop models, baselines, and reports; support audits and investment-grade analyses, M&V, and utility rate optimization.
Conduct energy audits of buildings, building systems, and process systems. May also perform investment-grade audits and develop cost-saving recommendations.
Advise clients on reducing energy use and costs through audits, data analysis, and strategic planning; develop and evaluate efficiency, electrification, and demand-side solutions, including investment-grade assessments and implementation support.
Conduct residential energy ratings by inspecting and testing building envelopes and systems, modeling energy performance, and issuing HERS Index scores and program or code compliance documentation.
Assess and optimize energy use in buildings and process systems through audits, analysis, and project implementation. Develop strategies for efficiency, demand management, and renewable integration, providing technical guidance from opportunity identification to measurement and verification.
Conduct energy audits of single- and multifamily homes to assess building envelopes and residential systems, perform diagnostic testing, and deliver investment-grade recommendations to improve efficiency, comfort, health, and cost savings.
Add Career Clutch to your home screen
Install the app for quick, full-screen access.
Tap then choose Add to Home Screen