Sign in Sign up

General Practice

Operate dredge to remove sand, gravel, or other materials in order to excavate and maintain navigable channels in waterways.

Dredge Engineer

Lead and optimize dredging operations, applying engineering oversight to equipment setup, system performance, and safety to efficiently remove sediments and maintain navigable waterways.

Dredge Mate

Assist the dredge operator with positioning, pumping, and excavation, coordinate deck crew and equipment, and help maintain safe, efficient dredging in navigable waterways.

Dredge Operator

Operate dredging equipment to excavate and maintain navigable waterways by removing sand, gravel, and other materials.

Dredge Worker

Support dredging operations by handling deck gear, anchors, and pipelines, assisting equipment operation, and performing routine maintenance to help excavate and maintain navigable waterways.

Dredgemaster

Oversee and control dredge vessel operations to excavate and maintain navigable channels, managing crew, production, safety, and regulatory compliance.

General Practice

Apply plasterboard or other wallboard to ceilings or interior walls of buildings. Apply or mount acoustical tiles or blocks, strips, or sheets of shock-absorbing materials to ceilings and walls of buildings to reduce or reflect sound. Materials may be of decorative quality. Includes lathers who fasten wooden, metal, or rockboard lath to walls, ceilings, or partitions of buildings to provide support base for plaster, fireproofing, or acoustical material.

Acoustical Installer

Install and finish suspended acoustical ceilings and wall systems, including tiles, panels, baffles, and clouds, to control sound and enhance interiors. Lay out and suspend grid frameworks; cut and fit tiles around fixtures; mount specialty acoustic treatments; and ensure alignment, code compliance, and specified acoustic performance. May remove existing ceilings and coordinate with other trades.

Drywall Contractor

Plan, manage, and perform drywall and related interior systems work on residential and commercial projects. Oversee layout, framing, hanging, and coordination of finishing, insulation, and fire- and sound-rated assemblies, with optional acoustical ceilings. Handle estimating, scheduling, procurement, crew supervision, safety, and code compliance to deliver quality installations on time.

Drywall Finisher

Prepare drywall surfaces for painting or final finish by taping, coating, sanding, and texturing joints, corners, and fasteners. Install and finish corner beads and trims; patch and repair gypsum board. Mix and apply joint compounds to achieve specified finish levels and textures, coordinating with hangers and painters to deliver smooth, uniform surfaces.

Drywall Installer

Install gypsum drywall panels on interior walls and ceilings of buildings. Measure, cut, and fit boards to layouts; fasten to wood or metal framing; and prepare openings for fixtures. May assemble light-gauge framing, furring, and insulation, and coordinate with drywall finishers and other trades.

Drywall Stripper

Remove drywall, plasterboard, lath, and acoustical ceiling or wall tiles from building interiors for renovation or demolition. Protect structures, locate utilities, control dust, and dispose or recycle materials; may dismantle framing, furring, insulation, and grid systems and prepare surfaces for new work.

Furrer

Install and align wood or metal furring strips, channels, and suspension systems on walls and ceilings to create level, plumb substrates and attachment points for drywall, plaster, cladding, or acoustical assemblies; lay out work from plans, anchor to structure, and coordinate with finish and ceiling crews to meet structural, fire, and acoustic requirements.

Lather

Install and secure wood, metal, or gypsum lath and related framing, hangers, and trims to create bases for plaster, stucco, fireproofing, and acoustical finishes on walls, ceilings, and partitions. Read plans, lay out work, cut and tie lath, set screeds and accessories, and prepare straight and curved surfaces, including exterior and moisture-resistant assemblies.

Metal Stud Framer

Fabricate and install light-gauge metal stud and track systems for interior partitions, soffits, and ceilings. Lay out, cut, and assemble cold-formed metal framing to plans and codes, ensuring assemblies are plumb, level, anchored, and ready for drywall or sheathing. Includes framing openings, backing, deflection and seismic components, and coordination with other trades.

General Practice

Operate a variety of drills such as rotary, churn, and pneumatic to tap subsurface water and salt deposits, to remove core samples during mineral exploration or soil testing, and to facilitate the use of explosives in mining or construction. Includes horizontal and earth boring machine operators.

Auger Operator

Operate truck- or track-mounted auger drilling rigs to bore holes in soil and soft rock for foundations, utility poles, anchors, and geotechnical or environmental sampling. Set up, align, and stabilize rigs; select and assemble auger flights and cutting heads; monitor torque, rotation, and down pressure; manage cuttings; and maintain equipment and records.

Boring Machine Operator

Operate horizontal and earth boring machines to create pilot bores and enlarge holes for utilities, anchors, foundations, and environmental work. Set up and align equipment, control drilling parameters and fluids, manage cuttings and tooling, install casings or product pipe, and perform routine maintenance and job documentation.

Churn Drill Operator

Operate cable-tool (churn) drilling rigs to percussively bore holes for water wells, blasting, and geotechnical borings; control stroke rate, tool string, casing, and bailers; collect geological samples; maintain equipment; and ensure safe, accurate drilling and well development.

Core Driller

Operate diamond and wireline core drilling rigs to extract continuous core samples for mineral exploration, geotechnical, and environmental investigations. Set up, align, and stabilize rigs; manage drilling fluids and tooling; and maintain equipment to ensure safe, efficient coring in varied formations.

Directional Drill Operator

Operate horizontal directional drilling (HDD) rigs to install underground utilities and conduits along planned bore paths, steering and tracking drill heads to avoid existing utilities, managing drilling fluids, and performing pilot bores, reaming, pullback, and equipment maintenance for construction and civil projects.

Drill Rig Operator

Operate and maintain truck- or track-mounted drill rigs to bore, core, and blast holes for water wells, geotechnical and environmental sampling, and construction or mining projects. Set up, align, and stabilize rigs; select and change tooling; monitor drilling parameters; ensure safe, efficient operations; and accurately document progress and subsurface conditions.

Driller

Operate and maintain drilling rigs and earth-boring equipment to drill, core, and blast holes for water wells, geotechnical and environmental sampling, and construction or mining work; set up rigs, control drilling parameters, collect samples, and ensure safe, accurate, and efficient operations.

Rock Drill Operator

Operate pneumatic and hydraulic rock drills to bore holes in rock for blasting, anchoring, and grouting in mining, quarrying, and heavy construction; set up and align drill rigs, regulate drilling parameters, and maintain equipment per plans and safety standards.

Water Well Driller

Operate and maintain rotary and cable-tool drilling rigs to construct, develop, and service water supply and monitoring wells, collecting subsurface data, installing casing and screens, and ensuring safe, compliant operations for residential, agricultural, municipal, and environmental projects.

General Practice

Assemble or modify electrical or electronic equipment, such as computers, test equipment telemetering systems, electric motors, and batteries.

Assembler

Build and modify products or subassemblies by following blueprints and work instructions; install components, perform basic fabrication, and conduct quality checks to meet specifications.

Battery Assembler

Assemble, modify, and test battery cells, modules, and packs by installing cells, bus bars, wiring, casings, and BMS components; weld or solder connections, seal enclosures, and troubleshoot to meet specifications and safety standards.

Electric Motor Assembler

Build and modify AC, DC, and servo electric motors by assembling stators, rotors, windings, shafts, bearings, housings, and related wiring to meet specifications.

Electric Wirer

Install, route, and terminate electrical wiring and harnesses in equipment, panels, or machinery; assemble wiring components, label and test circuits for continuity and performance, and repair defects to meet specifications.

Electrical Panel Builder

Build, wire, and modify electrical control panels and enclosures for machinery and facilities, following schematics and layouts; mount components, route and terminate wiring, and test for compliance.

Electronic Assembler

Assemble, modify, and test electronic products and subassemblies (e.g., PCB assemblies, instruments, sensors, control units) using soldering and hand tools while following schematics, work instructions, and quality standards.

Printed Circuit Board Assem...

Assemble, solder, and rework printed circuit board assemblies (SMT and through-hole) following schematics, BOMs, and IPC standards; inspect and test boards to meet quality and performance specifications.

SMT Operator (Surface-mount...

Set up, operate, and monitor SMT lines to assemble and modify printed circuit board assemblies, including stencil printing, component placement, reflow, and inspection, per work orders and quality standards.

Wire Harness Assembler

Assemble and modify wire harnesses for vehicles, aerospace, industrial, or electronic equipment by routing, terminating, and labeling wires; installing connectors and protective hardware; and testing for continuity and compliance with specifications.

General Practice

Prepare wiring diagrams, circuit board assembly diagrams, and layout drawings used for the manufacture, installation, or repair of electrical equipment.

CAD Drafter (Computer-Aided...

Prepare detailed CAD drawings, models, and layouts used for the manufacture, construction, installation, or repair of components, systems, or structures.

Circuit Board Drafter

Prepare detailed schematics, PCB layouts, and assembly/fabrication drawings for printed circuit boards, producing complete documentation and manufacturing outputs for build, test, and service. Collaborate with engineers and vendors to meet electrical, mechanical, and regulatory requirements in accordance with IPC and company standards.

Electrical Drafter

Prepare electrical plans, wiring diagrams, one-lines, and layout drawings for power distribution, lighting, controls, and communications, supporting the design, installation, and maintenance of building electrical systems.

Electromechanical Design Dr...

Prepare detailed 2D/3D drawings, wiring and cable harness diagrams, control panel layouts, and electromechanical assembly documents for the manufacture, installation, and repair of integrated electrical-mechanical equipment.