Sign in Sign up

Start a free practice interview and choose from over 6,000 career roles to practice

General Practice

Operate, install, adjust, and maintain integrated computer/communications systems, consoles, simulators, and other data acquisition, test, and measurement instruments and equipment, which are used to launch, track, position, and evaluate air and space vehicles. May record and interpret test data.

Aerospace Technician

Set up, operate, and maintain aerospace test equipment, instrumentation, and ground support systems used to build, launch, and evaluate aircraft and spacecraft. Collect, troubleshoot, and interpret test data; support checkouts and operations.

Instrumentation Technician

Install, operate, calibrate, and maintain sensors, data acquisition systems, and control/communications equipment used to monitor and evaluate mechanical, electrical, and process systems. Set up test rigs, verify signal integrity, and document and interpret results.

Test Technician

Install, set up, operate, calibrate, and maintain test equipment, instrumentation, data acquisition systems, and simulators used to evaluate components and systems. Record, analyze, and report test data, supporting engineers with procedures, troubleshooting, and verification.

Wind Tunnel Technician

Set up, operate, and maintain wind tunnel facilities, balances, model supports, and data acquisition and flow-measurement instruments used to test and evaluate aerodynamic models and aircraft components. Record, quality-check, and interpret test data.

General Practice

Supervise and coordinate the activities of ground crew in the loading, unloading, securing, and staging of aircraft cargo or baggage. May determine the quantity and orientation of cargo and compute aircraft center of gravity. May accompany aircraft as member of flight crew and monitor and handle cargo in flight, and assist and brief passengers on safety and emergency procedures. Includes loadmasters.

Cargo Supervisor

Supervise and coordinate airport cargo operations, directing ground crews in the loading, unloading, securing, and staging of air freight and baggage. Plan loads by determining cargo quantity and orientation and computing aircraft weight-and-balance. Enforce safety procedures, maintain equipment readiness, and ensure documentation and regulatory compliance.

Ground Operations Supervisor

Supervise and coordinate ramp and ground operations for aircraft turnarounds, including loading, unloading, securing, and staging of baggage and cargo. Ensure accurate weight-and-balance information, safety and regulatory compliance, proper use of equipment, and on-time performance. Liaise with flight crews, dispatch, vendors, and gate teams, and oversee staff training.

Loadmaster

Plan, supervise, and certify the loading, unloading, securing, and staging of aircraft cargo and baggage. Determine cargo quantity, orientation, and weight distribution, and compute aircraft center of gravity. Serve as a flight crew member to monitor and handle cargo in flight and brief passengers on safety and emergency procedures.

Ramp Supervisor

Supervise and coordinate ramp operations for aircraft turnarounds, including marshaling, loading and unloading baggage and cargo, and safe use of ground service equipment. Ensure adherence to load plans and weight-and-balance limits, coordinate fueling, deicing, and pushback, and lead ramp crews in safety, on-time performance, and regulatory compliance.

General Practice

Diagnose, adjust, repair, or overhaul aircraft engines and assemblies, such as hydraulic and pneumatic systems.

A & P Mechanic (Airframe an...

FAA-certificated A & P Mechanic who diagnoses, troubleshoots, repairs, and overhauls airframe and/or powerplant systems; performs inspections, modifications, and returns aircraft to service in compliance with OEM data, Airworthiness Directives, and FAA regulations to ensure airworthiness.

Aircraft Electrician

Install, troubleshoot, repair, and maintain aircraft electrical power generation and distribution systems, wiring harnesses, lighting, batteries, and related components, using wiring diagrams and test equipment to ensure airworthiness and regulatory compliance.

Aircraft Structural Repairer

Inspect, repair, and modify aircraft airframes and structural assemblies in metal and composites. Diagnose damage, fabricate and install structural components, treat corrosion, and ensure repairs meet SRM, engineering orders, and regulatory airworthiness standards.

Aircraft X-Ray Examiner

Perform radiographic nondestructive examinations (X-ray) of aircraft structures, engines, and components to detect internal defects; interpret images, document findings, and support maintenance decisions while ensuring radiation safety and regulatory compliance.

Aviation Maintenance Techni...

Inspect, diagnose, service, repair, and overhaul aircraft airframes, engines, and systems (hydraulic, pneumatic, fuel, electrical, environmental) to ensure airworthiness and compliance with regulations and manufacturer specifications.

GSE Tech (Ground Support Eq...

Diagnose, adjust, repair, and overhaul airport ground support equipment, including engines and assemblies such as hydraulic, pneumatic, electrical, and cooling systems, to ensure safe and reliable ramp operations.

Helicopter Mechanic

Diagnose, adjust, repair, and overhaul helicopter airframes, turboshaft engines, rotor and drive systems, and related hydraulic, electrical, and avionics systems to ensure safe, reliable operations.

Landing Gear Mechanic

Diagnose, service, repair, and overhaul aircraft landing gear systems and components—including struts, wheels, brakes, steering, retraction, and door mechanisms—to ensure safe gear operation and regulatory compliance.

Powerplant Mechanic

Inspect, troubleshoot, repair, and overhaul aircraft powerplants, including turbine and piston engines and related systems (fuel, ignition, lubrication, exhaust, propeller, FADEC/APU), to ensure airworthiness and performance.

Propeller Mechanic

Diagnose, adjust, repair, and overhaul aircraft propellers and related control systems, including governors, feathering, reversing, de-ice, and synchronizing, to ensure safe and efficient operation.

General Practice

Assemble, fit, fasten, and install parts of airplanes, space vehicles, or missiles, such as tails, wings, fuselage, bulkheads, stabilizers, landing gear, rigging and control equipment, or heating and ventilating systems.

Aircraft De-Icer Installer

Install, fit, and secure aircraft de-icing and anti-icing systems and components, such as pneumatic boots, electro-thermal heaters, TKS fluid equipment, propeller and windshield de-ice, sensors, plumbing, wiring, pumps, and valves, on wings, tails, engine inlets, and related structures; verify performance and compliance to specifications.

Aircraft Fuselage Framer

Assemble, fit, and join aircraft fuselage structures—frames, stringers, longerons, floor beams, skins, and bulkheads—using jigs, fixtures, and precision tools. Align and mate fuselage sections; install fasteners, sealants, and mounting provisions to meet blueprints, tolerances, and quality standards.

Aircraft Structures and Sur...

Assemble, fit, fasten, and install aircraft structural and exterior surface components—wings, fuselage, empennage, bulkheads, skins, panels, and related fittings—by drilling, riveting, bonding, and sealing to meet engineering specifications and quality standards.

Harness Builder

Assemble, terminate, bundle, label, and install electrical wire harnesses and cable assemblies for aircraft, spacecraft, and missiles. Use wiring diagrams and harness boards to route conductors, fit connectors and backshells, apply shielding and protective coverings, and inspect and test to aerospace standards.

Hydraulic Assembler

Assemble, route, and install aircraft hydraulic systems and components—including tubing, hoses, pumps, reservoirs, manifolds, valves, actuators, and fittings—ensuring cleanliness, alignment, leak-free performance, and compliance with blueprints, schematics, and aerospace standards.

Precision Assembler

Precisely assemble, fit, and install high-tolerance aerospace subassemblies and mechanisms—such as actuators, linkages, control cables, and hydraulic/pneumatic or avionics-mechanical modules—for aircraft, spacecraft, or missiles, using jigs, fixtures, and metrology; verify alignment, function, and compliance to specifications.

Safety Glass Installer

Install, fit, and secure tempered and laminated safety glass in buildings, vehicles, and equipment, including storefronts, doors, partitions, railings, shower enclosures, and windshields, using frames, gaskets, adhesives, and hardware; ensure alignment, weather sealing, and code compliance.

Sheet Metal Assembler and R...

Build, fit, drill, and rivet aircraft sheet metal structures and skins, assembling and installing subassemblies such as fuselage panels, wings, bulkheads, and doors using jigs, precision layout, and aerospace fasteners; apply sealants and corrosion protection and perform inspections to meet specifications and airworthiness standards.

General Practice

Ensure the safe takeoff and landing of commercial and military aircraft. Duties include coordination between air-traffic control and maintenance personnel, dispatching, using airfield landing and navigational aids, implementing airfield safety procedures, monitoring and maintaining flight records, and applying knowledge of weather information.

Airfield Operations Specialist

Ensure safe, efficient airfield operations and aircraft movements by coordinating with ATC, maintenance, and flight crews; dispatching; operating landing and navigational aids; enforcing safety procedures; maintaining flight records; and applying weather and NOTAM information.

Airline Dispatcher

Plan, release, and monitor airline flights to ensure safety, regulatory compliance, and operational efficiency. Coordinate with pilots, ATC, maintenance, and stations; analyze weather, NOTAMs, performance, and fuel; issue flight releases, manage reroutes and diversions, and maintain operational control and records.

Airport Ramp Agent

Ensure safe, efficient ground handling of commercial aircraft. Responsibilities include marshalling and parking, loading and unloading baggage and cargo, operating ground service equipment, coordinating fueling, deicing, and pushback with flight crews and operations, enforcing ramp safety and security, and maintaining accurate load, weight-and-balance inputs, and service records.

Airport Supervisor

Lead and supervise daily airport operations to ensure safe, compliant, and efficient airside and landside activity. Coordinate with ATC, airlines, tenants, maintenance, and emergency services; manage inspections, NOTAMs, field condition reporting, construction impacts, and communications; maintain operational records; and direct staff training, response, and resource allocation using current weather and operational data.

Flight Operations Coordinator

Coordinate day-to-day flight operations to ensure safe, efficient departures and arrivals. Liaise among flight crews, air traffic control, maintenance, and ground services; prepare and amend flight plans; disseminate weather and NOTAMs; monitor flights and turnarounds; maintain operational records; and uphold safety and regulatory compliance.