Sign in Sign up

General Practice

Plan and design land areas for projects such as parks and other recreational facilities, airports, highways, hospitals, schools, land subdivisions, and commercial, industrial, and residential sites.

Golf Course Architect

Plan and design golf courses and practice facilities from concept through opening, shaping land to create strategic, safe, and sustainable play while coordinating drainage, irrigation, planting, and construction with stakeholders.

Land Planner

Plan and design land use and site layouts for subdivisions, mixed-use, commercial, and public projects; prepare master plans and entitlements; analyze zoning and infrastructure; and coordinate approvals with clients, consultants, and agencies.

Landscape Architect

Plan and design outdoor environments for parks, campuses, streetscapes, transportation corridors, hospitals, schools, subdivisions, and commercial, industrial, and residential sites, balancing aesthetics, function, ecology, codes, and budget.

Roofers

8 jobs

General Practice

Cover roofs of structures with shingles, slate, asphalt, aluminum, wood, or related materials. May spray roofs, sidings, and walls with material to bind, seal, insulate, or soundproof sections of structures.

Hot Tar Roofer

Install, repair, and maintain built-up and modified bitumen roofing on low-slope roofs using hot asphalt/tar, felts, and gravel. Operate kettles and related equipment to mop, pour, and apply bitumen to seal, waterproof, and insulate roof assemblies and adjacent surfaces.

Metal Roofer

Install, repair, and replace metal roofing systems on buildings, including standing seam, corrugated panels, and metal shingles. Fabricate and fit panels, flashings, and trim; install underlayment and insulation; and apply sealants or protective coatings to weatherproof, insulate, or soundproof roofs and exterior walls.

Roofer

Install, repair, and replace roofs using shingles, slate, asphalt, metal, wood, and related materials. Apply coatings or membranes to bind, seal, insulate, or soundproof roofs, sidings, and walls.

Roofing Consultant

Advise owners, designers, and contractors on roof system selection, design, and maintenance. Conduct inspections and assessments; develop scopes, specifications, and cost estimates; oversee field QA; and ensure code, warranty, safety, and performance compliance for roofing and related waterproofing systems.

Roofing Contractor

Plan, manage, and perform residential and commercial roofing projects, installing and repairing roof systems using shingles, slate, asphalt, metal, wood, or related materials. Coordinate crews, permits, and procurement; apply coatings and waterproofing to bind, seal, insulate, or soundproof building envelopes while ensuring safety and code compliance.

Slate Roofer

Install, repair, and restore natural or synthetic slate roofing on steep-slope buildings. Cut and fasten slate, fabricate metal flashing, and install underlayments and ventilation to deliver durable, watertight roofs while protecting the structure.

Tile Roofer

Install, repair, and replace clay, concrete, or synthetic tile roofing systems. Prepare roof decks, apply underlayment and flashing, and cut, set, and secure tiles, ridge caps, and hip tiles to deliver durable, watertight roofs. May integrate skylights, ventilation, and solar mounts and perform leak repairs.

General Practice

Direct work crews installing residential or commercial solar photovoltaic or thermal systems.

Solar Energy Installation M...

Direct crews installing residential and commercial solar photovoltaic and thermal systems, ensuring safety, code compliance, and timely delivery.

Solar Installation Supervisor

Lead and coordinate field crews installing residential and commercial solar PV and thermal systems, ensuring safety, quality, schedule adherence, and code compliance.

Solar Project Manager (Sola...

Lead planning, execution, and delivery of residential and commercial solar PV and thermal projects, managing scope, schedule, budget, quality, safety, and stakeholder coordination from site evaluation through commissioning.

General Practice

Perform site-specific engineering analysis or evaluation of energy efficiency and solar projects involving residential, commercial, or industrial customers. Design solar domestic hot water and space heating systems for new and existing structures, applying knowledge of structural energy requirements, local climates, solar technology, and thermodynamics.

Photovoltaic System Designe...

Design and engineer site-specific photovoltaic (PV) systems for residential, commercial, and industrial customers. Perform electrical and structural analyses, model energy production, and deliver permit-ready drawings and specifications that meet NEC, building code, and utility interconnection requirements.

Solar Design Engineer

Design and engineer solar photovoltaic (PV) and solar thermal systems for residential, commercial, and industrial projects. Perform site-specific analysis, system sizing, and documentation using knowledge of building loads, local codes, climate, solar technology, and thermodynamics to deliver efficient, code-compliant, and constructible designs.

Solar Energy Engineer

Engineer and optimize solar energy solutions for residential, commercial, and industrial sites through site-specific analysis and energy efficiency evaluations. Design and integrate photovoltaic and solar thermal systems for new and existing structures, applying knowledge of building loads, local climate, solar technologies, and thermodynamics.

Solar Energy Systems Engineer

Conduct site-specific engineering analyses for solar and energy-efficiency projects in residential, commercial, and industrial settings. Design and optimize photovoltaic and solar thermal systems for new and existing structures, applying knowledge of structural loads, local climate, codes, solar technologies, and thermodynamics.

Solar Mechanical Engineer

Design and engineer mechanical systems for solar energy projects, with emphasis on solar domestic hot water, space heating, and the mechanical aspects of PV installations. Perform site-specific analysis; conduct thermal and structural calculations; and produce mechanical designs for collectors, piping, heat exchangers, storage, and racking that meet code, climate, performance, and safety requirements across residential, commercial, and industrial facilities.

Solar Performance Engineer

Analyze, monitor, and optimize the performance of residential, commercial, industrial, and utility-scale solar energy systems. Conduct site- and fleet-level assessments, modeling, and testing to verify energy yield for PV and solar thermal (domestic hot water and space heating) systems, diagnose losses, and implement improvements using knowledge of structural and energy requirements, local climates, solar technology, controls, and thermodynamics.

Solar Professional Engineer...

Lead and seal site-specific engineering, design, and evaluation of solar PV and solar thermal projects for residential, commercial, and industrial clients. Apply licensed professional judgment to deliver code-compliant designs, calculations, and drawings informed by structural loads, electrical requirements, local climates, and thermodynamics. Oversee permitting, interconnection, safety, and quality to ensure reliable, efficient systems.

Solar Project Engineer

Manage and execute the engineering scope of solar projects from feasibility through commissioning. Perform site-specific analyses and develop PV and solar thermal designs for residential, commercial, and industrial sites, ensuring code compliance, performance, safety, schedule, and budget.

Solar PV Designer (Solar Ph...

Design grid-tied solar photovoltaic systems for residential, commercial, and industrial sites. Perform site-specific assessments, energy modeling, and code-compliant electrical and structural layouts; produce permit, interconnection, and construction documents; and support installation and commissioning to ensure safe, efficient, and cost-effective PV deployments.

Solar PV Systems Engineer (...

Perform site-specific engineering analysis and evaluation of photovoltaic (PV) projects for residential, commercial, and industrial customers. Design grid-tied and hybrid PV systems for new and existing facilities, applying knowledge of electrical power systems, structural constraints, solar resource, PV technology, and applicable codes and standards.

Surveyors

4 jobs

General Practice

Make exact measurements and determine property boundaries. Provide data relevant to the shape, contour, gravitation, location, elevation, or dimension of land or land features on or near the earth's surface for engineering, mapmaking, mining, land evaluation, construction, and other purposes.

Land Surveyor

Measure and map land to establish and document property boundaries and topography for design, construction, land development, and legal purposes. Collect, analyze, and certify survey data, produce plats and legal descriptions, and coordinate with engineers, planners, and clients.

Mine Surveyor

Conduct precise measurements above and below ground to support mine planning, development, and safety. Establish and monitor control networks, map workings and ore bodies, calculate volumes and grades, and deliver spatial data for excavation, drilling, blasting, ventilation, and regulatory compliance in surface and underground mines.

Survey Engineer

Apply engineering principles to plan, execute, and manage land, geodetic, and construction surveys. Establish control, determine boundaries and topography, and deliver precise geospatial data and models for design, construction, and asset management while ensuring accuracy, standards compliance, and integration with CAD/BIM and GIS.