Sign in Sign up

General Practice

Smooth and finish surfaces of poured concrete, such as floors, walks, sidewalks, roads, or curbs using a variety of hand and power tools. Align forms for sidewalks, curbs, or gutters; patch voids; and use saws to cut expansion joints.

Concrete Cutter

Cut, core, and remove concrete in slabs, walls, pavements, and curbs using hand and power saws. Lay out and saw control joints, openings, and demolition segments; protect utilities; manage dust and slurry; rig and remove sections; and maintain cutting equipment and safety compliance.

Concrete Finisher

Smooth, finish, and cure poured concrete surfaces—slabs, floors, sidewalks, curbs, and pavements—using hand and power tools. Set and align forms, place and consolidate concrete, create joints and edges, and apply textures, treatments, and sealers to achieve specified finishes.

Concrete Form Setter

Install, align, and brace concrete formwork for slabs, walls, curbs, gutters, footings, and structural elements using wood and metal systems. Read plans and set elevations, build and secure forms, install ties and embedded items, apply release agents, and verify line, level, and safety. Monitor forms during placement and strip, clean, and stock components after curing.

Concrete Placement Equipmen...

Set up, operate, and maintain concrete placement equipment—such as pump trucks, placing booms, conveyors, chutes, and laser screeds—to safely deliver and place concrete to line and grade. Coordinate with crews and drivers, monitor mix flow and site conditions, and perform cleanup, minor repairs, and documentation.

Concrete Polisher

Grind, hone, and polish cured concrete surfaces (floors, slabs, countertops) to specified flatness, gloss, and profile using planetary grinders and hand tools; repair minor defects, densify and seal, cut or fill joints, and apply dyes or guards to deliver durable, decorative finishes.

Swimming Pool Installer

Install and finish in-ground swimming pools by preparing sites, forming and shooting concrete or gunite shells, installing plumbing and fixtures, and applying plaster, tile, coping, and decks. Use hand and power tools to align forms, set steel, waterproof, cure, and finish surfaces to specified slopes and standards.

General Practice

Inspect structures using engineering skills to determine structural soundness and compliance with specifications, building codes, and other regulations. Inspections may be general in nature or may be limited to a specific area, such as electrical systems or plumbing.

Building Inspector

Inspect residential and commercial buildings to determine structural soundness and compliance with building, electrical, plumbing, mechanical, fire, accessibility, and energy codes, approved plans, and regulations. Perform inspections during construction, renovation, and occupancy; document findings and enforce corrective actions.

Electrical Inspector

Inspect electrical systems in residential, commercial, and industrial structures to verify safety, performance, and compliance with the National Electrical Code (NEC), approved plans, and local regulations. Scope includes services, wiring methods, grounding and bonding, low-voltage, renewable energy, and life-safety systems.

Elevator Inspector

Inspect elevators, escalators, moving walks, and related conveyances to verify mechanical, electrical, and structural safety and compliance with ASME A17.1/CSA B44, NEC, accessibility, and local codes; review plans, witness tests, document findings, and issue certificates and enforcement actions.

Engineering Inspector

Inspect civil, structural, mechanical, and electrical work to verify engineering integrity, code compliance, and adherence to plans, specifications, and safety standards on construction and infrastructure projects.

Gas Inspector

Inspect natural gas and propane systems—including piping, meters, regulators, appliances, and vents—in buildings and utility distribution settings to verify safety, integrity, and compliance with fuel gas codes, utility standards, and regulations.

Plan Examiner

Review construction documents and permit applications to determine compliance with building codes, zoning, fire and life safety, accessibility, and related regulations; coordinate multidisciplinary reviews, issue permits or correction notices, and guide applicants toward code-compliant solutions.

Plumbing Inspector

Inspect plumbing systems in residential, commercial, and industrial structures to verify safety, workmanship, and compliance with plumbing codes, approved plans, and specifications through rough-in, underground, and final inspections.

Safety Inspector

Conduct workplace and construction site safety inspections to identify hazards, verify compliance with OSHA, fire, and company standards, and recommend corrective actions. Apply technical knowledge to assess equipment, processes, and environments and document findings.

Transportation Construction...

Inspect transportation construction projects—highways, bridges, and related infrastructure—for structural quality, materials, safety, and compliance with plans, DOT specifications, and codes; may specialize in roadways, bridges, traffic systems, or drainage.

Utility Inspector

Inspect utility infrastructure and construction (water, sewer, gas, electric, and telecom) to assess safety, integrity, and compliance with codes, permits, and utility standards. Apply engineering judgment to evaluate installations, operations, and maintenance activities, document findings, and recommend corrective actions.

General Practice

Perform tasks involving physical labor at construction sites. May operate hand and power tools of all types: air hammers, earth tampers, cement mixers, small mechanical hoists, surveying and measuring equipment, and a variety of other equipment and instruments. May clean and prepare sites, dig trenches, set braces to support the sides of excavations, erect scaffolding, and clean up rubble, debris, and other waste materials. May assist other craft workers.

Asphalt Worker

Perform physically demanding work on asphalt paving and maintenance projects. Operate hand and power tools and light equipment such as asphalt rakes, lutes, plate compactors, tack sprayers, pavers, rollers, saws, and skid steers. Prepare and clean work areas; set grades and edges; place, spread, and compact hot mix asphalt; and support paving, milling, and patching crews on roads and parking lots. May set up traffic control and clean and maintain tools and equipment.

Concrete Worker

Perform concrete placement, finishing, and formwork at construction sites. Operate hand and power tools such as screeds, vibrators, trowels, mixers, concrete saws, and small hoists. Prepare subgrades, set and brace forms, place reinforcement and embeds, pour and consolidate concrete, finish surfaces, and cure and protect work. Clean and maintain tools and sites, assist other craft workers, and follow safety and quality standards.

Construction Laborer

Perform physical labor on construction sites, operating a wide range of hand and power tools. Prepare and clean sites; excavate and backfill; set braces and erect scaffolding; handle materials and equipment; assist skilled trades; and perform basic concrete and demolition work. Use small hoists, mixers, tampers, and surveying or measuring tools while following safety and housekeeping standards.

Demolition Worker

Perform manual demolition at construction and renovation sites. Use hand and power tools to dismantle structures, remove building components, control dust, and handle debris safely. Erect temporary protections and shoring, operate small equipment, and assist equipment operators while following plans, safety procedures, and environmental regulations.

Swimming Pool Installer

Install residential and commercial swimming pools by performing site preparation, excavation, forming, plumbing, equipment setup, and concrete/shotcrete, liner, or shell installation. Operate hand and power tools and light equipment to build shells, decks, tile, and coping and to set and start up pumps, filters, and heaters. Clean and secure sites, follow safety and code requirements, and assist licensed trades as needed.

General Practice

Install, repair, and maintain mechanical regulating and controlling devices, such as electric meters, gas regulators, thermostats, safety and flow valves, and other mechanical governors.

Controls Technician

Install, troubleshoot, calibrate, and maintain control systems and instrumentation, including sensors, actuators, valves, regulators, meters, PLCs, and HMIs, to ensure safe, accurate, and reliable operation.

Instrument Technician

Install, calibrate, troubleshoot, and maintain industrial instrumentation and control equipment—pressure, temperature, flow, and level devices; control valves and positioners; analyzers; and related wiring and interfaces—to ensure accurate measurement and safe, reliable process control.

Meter Technician

Install, inspect, test, calibrate, and maintain electric and gas meters and associated metering equipment; perform service connects/disconnects, troubleshoot inaccuracies, leaks, and communication issues, document work, and ensure safe, compliant operation.

Valve Technician

Install, inspect, repair, and calibrate control, safety-relief, and isolation valves and associated actuators, positioners, and regulators to maintain accurate flow and pressure control, leak integrity, and safe, reliable operation of process systems.

General Practice

Apply plasterboard or other wallboard to ceilings or interior walls of buildings. Apply or mount acoustical tiles or blocks, strips, or sheets of shock-absorbing materials to ceilings and walls of buildings to reduce or reflect sound. Materials may be of decorative quality. Includes lathers who fasten wooden, metal, or rockboard lath to walls, ceilings, or partitions of buildings to provide support base for plaster, fireproofing, or acoustical material.

Acoustical Installer

Install and finish suspended acoustical ceilings and wall systems, including tiles, panels, baffles, and clouds, to control sound and enhance interiors. Lay out and suspend grid frameworks; cut and fit tiles around fixtures; mount specialty acoustic treatments; and ensure alignment, code compliance, and specified acoustic performance. May remove existing ceilings and coordinate with other trades.

Drywall Contractor

Plan, manage, and perform drywall and related interior systems work on residential and commercial projects. Oversee layout, framing, hanging, and coordination of finishing, insulation, and fire- and sound-rated assemblies, with optional acoustical ceilings. Handle estimating, scheduling, procurement, crew supervision, safety, and code compliance to deliver quality installations on time.

Drywall Finisher

Prepare drywall surfaces for painting or final finish by taping, coating, sanding, and texturing joints, corners, and fasteners. Install and finish corner beads and trims; patch and repair gypsum board. Mix and apply joint compounds to achieve specified finish levels and textures, coordinating with hangers and painters to deliver smooth, uniform surfaces.

Drywall Installer

Install gypsum drywall panels on interior walls and ceilings of buildings. Measure, cut, and fit boards to layouts; fasten to wood or metal framing; and prepare openings for fixtures. May assemble light-gauge framing, furring, and insulation, and coordinate with drywall finishers and other trades.

Drywall Stripper

Remove drywall, plasterboard, lath, and acoustical ceiling or wall tiles from building interiors for renovation or demolition. Protect structures, locate utilities, control dust, and dispose or recycle materials; may dismantle framing, furring, insulation, and grid systems and prepare surfaces for new work.

Furrer

Install and align wood or metal furring strips, channels, and suspension systems on walls and ceilings to create level, plumb substrates and attachment points for drywall, plaster, cladding, or acoustical assemblies; lay out work from plans, anchor to structure, and coordinate with finish and ceiling crews to meet structural, fire, and acoustic requirements.

Lather

Install and secure wood, metal, or gypsum lath and related framing, hangers, and trims to create bases for plaster, stucco, fireproofing, and acoustical finishes on walls, ceilings, and partitions. Read plans, lay out work, cut and tie lath, set screeds and accessories, and prepare straight and curved surfaces, including exterior and moisture-resistant assemblies.

Metal Stud Framer

Fabricate and install light-gauge metal stud and track systems for interior partitions, soffits, and ceilings. Lay out, cut, and assemble cold-formed metal framing to plans and codes, ensuring assemblies are plumb, level, anchored, and ready for drywall or sheathing. Includes framing openings, backing, deflection and seismic components, and coordination with other trades.