Sign in Sign up

Start a free practice interview and choose from over 6,000 career roles to practice

General Practice

Operate or tend bonding machines that use adhesives to join items for further processing or to form a completed product. Processes include joining veneer sheets into plywood; gluing paper; or joining rubber and rubberized fabric parts, plastic, simulated leather, or other materials.

Bindery Operator

Operate and maintain bindery and print-finishing equipment to assemble, bind, fold, trim, and package printed materials such as books, catalogs, and brochures. Processes include collating signatures, perfect binding with hot-melt glue, saddle stitching, wire/coil binding, folding, scoring and perforating, laminating, and shrink-wrapping.

Bonding Machine Operator

Set up and operate adhesive bonding machines to join materials for in-process assembly or finished products, including plywood veneers, paper, rubber and rubberized fabrics, plastics, simulated leather, and similar materials.

Box Lining Machine Operator

Operate or tend box lining machines that apply adhesives to attach paper, film, or foil liners to folding cartons or rigid boxes. Set up, monitor, and adjust equipment to meet specifications for size, glue application, alignment, and quality.

Cementer

Apply and cure cement adhesives by hand or with cementing and pressing equipment to join, laminate, or seal materials for further processing or finished products, including rubber, leather, plastic, wood, paper, and similar materials.

Edge Gluer

Operate and tend edge-gluing equipment to bond board edges or veneer strips into panels or components, setting up, monitoring, and adjusting adhesive application, pressure, and cycle conditions to meet specifications.

Gluer

Set up and operate gluing equipment to apply adhesives and bond paper, paperboard, veneers, plastics, rubber, or similar materials to produce components or finished products such as cartons, laminates, and assemblies.

Sealing Machine Operator

Operate or tend sealing machines to close or join packages, pouches, or components using heat, pressure, induction, or ultrasonic methods for further processing or finished products. Processes include sealing plastic film, foil lidding, blister packs, and laminated materials.

General Practice

Operate, install, adjust, and maintain integrated computer/communications systems, consoles, simulators, and other data acquisition, test, and measurement instruments and equipment, which are used to launch, track, position, and evaluate air and space vehicles. May record and interpret test data.

Aerospace Technician

Set up, operate, and maintain aerospace test equipment, instrumentation, and ground support systems used to build, launch, and evaluate aircraft and spacecraft. Collect, troubleshoot, and interpret test data; support checkouts and operations.

Instrumentation Technician

Install, operate, calibrate, and maintain sensors, data acquisition systems, and control/communications equipment used to monitor and evaluate mechanical, electrical, and process systems. Set up test rigs, verify signal integrity, and document and interpret results.

Test Technician

Install, set up, operate, calibrate, and maintain test equipment, instrumentation, data acquisition systems, and simulators used to evaluate components and systems. Record, analyze, and report test data, supporting engineers with procedures, troubleshooting, and verification.

Wind Tunnel Technician

Set up, operate, and maintain wind tunnel facilities, balances, model supports, and data acquisition and flow-measurement instruments used to test and evaluate aerodynamic models and aircraft components. Record, quality-check, and interpret test data.

General Practice

Perform engineering duties in designing, constructing, and testing aircraft, missiles, and spacecraft. May conduct basic and applied research to evaluate adaptability of materials and equipment to aircraft design and manufacture. May recommend improvements in testing equipment and techniques.

Aerodynamics Engineer

Design, analyze, and test aerodynamic performance of aircraft, missiles, and spacecraft. Use CFD, wind tunnels, and flight data to optimize lift, drag, stability, control, and aeroheating. Conduct research on flow physics and recommend improvements to aerodynamic tools, models, and test methods.

Aerospace Engineer

Design, develop, and test aircraft, missiles, and spacecraft from concept through validation. Conduct basic and applied research to assess materials, components, and manufacturing methods for aerospace applications. Analyze results and recommend improvements to designs, test equipment, and test methods to enhance performance, safety, cost, and compliance.

Aerospace Quality Engineer

Ensure aerospace products and processes meet customer, regulatory, and industry quality standards. Develop and enforce quality systems, inspection and test plans, and supplier quality; analyze data to prevent and correct defects; lead root cause and corrective actions; and support certification and compliance across design, manufacturing, and testing.

Avionics Engineer

Design, integrate, and test avionics hardware and software for aircraft, spacecraft, and missiles, including navigation, communication, surveillance, and flight-control systems. Conduct applied research and trade studies to assess suitability of components, materials, and architectures for airborne electronic systems and manufacturability. Recommend improvements to test equipment, simulation environments, and verification techniques to enhance reliability, safety, and certification readiness.

GNC Engineer (Guidance Navi...

Design, implement, and test guidance, navigation, and control (GNC) systems for aircraft, missiles, and spacecraft. Develop models, algorithms, sensors, and embedded software to meet mission performance, safety, and reliability requirements. Conduct research, simulation, and hardware-in-the-loop testing and recommend improvements to tools, test equipment, and techniques.

Propulsion Engineer

Design, develop, and test propulsion systems for aircraft and spacecraft, including gas turbines, rocket engines, and electric propulsion. Conduct research on materials, fuels, and components to improve performance, reliability, and efficiency. Recommend enhancements to test facilities, instrumentation, and methods.

Spacecraft Engineer

Design, integrate, and test spacecraft, subsystems, and payloads for Earth‑orbit and deep‑space missions. Conduct research and analysis to select materials, components, and architectures suited to the space environment. Develop and refine models, tools, and test methods to validate performance and reliability from launch through on‑orbit operations.

Structures Engineer

Perform engineering duties in designing, analyzing, and testing airframe and spacecraft structures and components. May conduct basic and applied research on metallic and composite materials, joints, and processes for structural applications. May recommend improvements in structural analysis methods, test articles, fixtures, and inspection techniques.

Systems Engineer

Design, integrate, and test complex systems across the lifecycle to meet performance, reliability, safety, and compliance requirements. Conduct research, modeling, and trade studies to assess technologies, components, and materials for suitability and producibility. Recommend and implement improvements to verification tools, test methods, and development processes.

Test Engineer

Plan, design, and execute tests to validate aerospace components, systems, and vehicles. Develop test plans, instrumentation, and data analysis to verify performance, safety, and compliance. Coordinate lab, ground, and flight test activities; analyze results; and recommend improvements to products, test equipment, and methods.

General Practice

Assist engineers in determining the practicality of proposed product design changes and plan and carry out tests on experimental test devices or equipment for performance, durability, or efficiency.

Automotive Engineering Tech...

Support automotive engineers by evaluating the practicality of proposed design changes and by planning, setting up, and conducting tests on prototype components, systems, and vehicles to validate performance, durability, and efficiency.

General Practice

Develop new or improved designs for vehicle structural members, engines, transmissions, or other vehicle systems, using computer-assisted design technology. Direct building, modification, or testing of vehicle or components.

Automotive Designer

Create exterior, interior, and HMI designs for vehicles using sketching, CAS/CAD, and Class-A surfacing tools. Translate brand strategy and user needs into feasible, manufacturable products by collaborating with engineering and suppliers and directing prototyping and design validation.

Automotive Engineer

Design and improve vehicle structures, powertrains, and subsystems using CAD/CAE tools; lead or support the build, modification, validation, and testing of vehicles and components.

Automotive Project Engineer

Plan, coordinate, and deliver vehicle system development projects—spanning structures, powertrain, and chassis—using CAD/CAE and systems engineering methods. Lead cross-functional teams and suppliers to build, modify, and validate components while managing scope, schedule, cost, risk, and quality.

Automotive Quality Engineer

Ensure the quality, safety, and compliance of automotive components and vehicle systems by developing and managing quality standards, validation plans, and control methods; lead testing, audits, and root-cause corrective actions across design, suppliers, and manufacturing using data-driven tools.

Automotive Systems Engineer

Design, integrate, and validate vehicle systems and controls by defining requirements and interfaces, developing system architectures and model-based designs, and coordinating cross-functional integration and system-level testing to deliver safe, reliable, and compliant vehicles.

Powertrain Engineer

Design, develop, and validate internal combustion, hybrid, and electric powertrain systems, including engines, e-motors, transmissions, drivelines, and controls, using CAD/CAE and calibration tools. Lead prototyping, integration, and testing to meet performance, efficiency, NVH, durability, emissions, and regulatory targets.

Product Engineer

Develop and optimize automotive products and components using CAD and data-driven methods. Own product requirements, specifications, validation, and manufacturability; lead prototype builds, modifications, and testing through launch.